The Dual Subwoofer project
The two 4" ABS ports cut to length
The old amp and driver, removed from the old box.
The holes cut in the front panels for the drivers.
The assembly of the new cabinet.
Glue and screw.
Showing the approximate size of the new enclosure.
And again.
So, today was a bad day. I decided to do a sanity check and went and got the second sub to take it apart and make sure the drivers both fit, relative to the holes.
I found out that the first sub that I ordered was the first series driver and the second was the second series driver. I didn't order them that far apart, but it was enough
for them to do a design change. The new driver is larger all around and I cut the holes based on that. Also, the new driver has different specs and I can't use the two
of them in the same box. So, I am on the hunt for a solution. Off to the AVS Forum.
 |
 |
 |
If you have comments or suggestions, email me
